Shipping costs are calculated based on your location and the items in your order.

Product may be returned within 30-days from the date of purchase for a full refund or exchange.  Product must be new in the box for full refund.  Please note shipping and handling charges are excluded.  Original shipping costs (if applicable) and return shipping costs will be the purchaser’s expense.  This policy applies only to items purchased direct from goldtip.com and does not apply to purchases made through a retailer.

Only one discount code can be used per order and cannot be combined with other promotions.

FOC is important, but really begins to take effect at longer shot distances (40 yards plus).  For a hunting arrow chose an FOC in the range of 8-12%.  Some target applications will require more than that, but there are not any written rules as to how much is best.  Trial and error is the best method to be employed here and the use of Gold Tip’s weight system makes tinkering with FOC a very simple prospect.

First, find and mark the balance point of the arrow by balancing your arrow on a narrow surface (your finger will work fine). Secondly, find the center of your arrow by dividing the total length by two (2) and marking it on the arrow.  Now measure the distance between the center and balance point and divide that number by the total arrow length. Lastly, multiply that number by 100 to get your FOC percentage.

Please see our insert installation instructions 

Kinetic Energy=Velocity Squared multiplied by Mass (arrow weight in grains) divided by 450,240.

Straightness can have a significant effect on the accuracy of an arrow.  Although the difference between a .006” and a .001” straightness arrow won’t be night and day you will definitely notice accuracy advantages with a straighter arrow, particularly if you are shooting broadheads. 

This is a question that has been asked and answered many different times and ways over the years and there is not a clear cut answer.  However, it is common to measure an arrows penetrating power in terms of Kinetic Energy (KE).  With this method being employed you will
find that the KE of an arrow is dictated more by the bow than the arrow and that a heavy arrow and a light arrow fired from the same bow will produce almost exactly the same amount of KE.   That being the case, many hunters today are opting for the lighter arrow in order to increase margin for error in yardage estimation, get tighter pin gaps for in-between shot distances, and reduce time to target of the arrow. 

Trial and error for your particular setup is the best answer here, but a good rule of thumb is to use the smallest amount of fletching possible that will still provide good accuracy and stability. Longer fletching is heavier, creates drag (which slows your arrow more quickly), is more susceptible to contacting your arrow rest or cables, and is more susceptible to windy conditions. However, none of these factors are worth worrying about if you cannot get adequate stability, so you may still want to opt for that 4” vane. 

Please see our installation instructions.