arrow customization
Arrow Spine Selector Tool
Use the Gold Tip spine selector tool to find out which arrow spine is best for your bow. Arrow length is measured from the throat of the nock to the end of the insert. If you are shooting a longer broadhead than field point, you may want to choose a slightly stiffer shaft.
Important: Please Read
Point Weight = The total combined weight of point, insert, Ballistic Collar and FACT weight.
How to Select Your Arrow Spine
Find Your Draw and Point Weight
Find your draw weight and point weight in the chart to determine where to start your shaft selection.
Measure Your Arrow Length
Measure your arrow from the throat of the nock to the end of the insert. Use this measurement when selecting your shaft.
Find Your Group Number
Use the shaft selection chart to find the group number that matches your draw weight, point weight and arrow length.
Select Your Arrow Spine
Find the appropriate spine selection for your bow, then use the detailed arrow specifications chart to see which shafts are available in that spine.
Arrow Length & Broadhead Note
Arrow length is measured from the throat of the nock to the end of the insert. If you are shooting a broadhead that is longer than your field point, consider choosing a slightly stiffer shaft.
Compound Bows with Finger Release
When shooting finger release, start by selecting an arrow 2 boxes to the weaker side (to the left). Start with the arrow 1” longer than you selected and cut it down 1/4” at a time until you have a perfectly tuned shaft using the bare shaft tuning method outlined in the back of the Gold Tip product catalog and the Arrow University section of the Gold Tip website (goldtip.com).
Traditional Recommendations
If you are shooting a recurve/longbow, first establish the draw weight of the bow at the length you draw it to. This is best accomplished by bringing the bow to full draw and having a friend mark the arrow where it intersects the outside of the riser. For either longbow or recurve, start with the arrow at least 1” longer than your desired finished arrow and cut the shaft down 1/4” at a time until you establish a perfect tune using the bare shaft tuning guide outlined in the back of the Gold Tip product catalog. You can use the Gold Tip weight system to fine tune the spine reaction and increase the mass weight of the arrow.